全国劳动热线:

18396804865 钱经理

美洲杯竞猜平台,美洲杯足彩竞猜,美洲杯竞猜官网

2019-12-18 11:07:37 文章来源:www.neyon.net 144

   在数控美洲杯竞猜官网能源上调整之股票数有:
  The parameters adjusted in the power supply of CNC plasma cutting machine are as follows:
  (1)电流:手动旋扭给定(2)PG1引弧气气压及收费量:
  (1) Current: Manual twisting given (2) PG1 arcing gas pressure and flow:
  (3)PG2切割气气压及收费量:
  (3) Gas pressure and flow rate of PG2 cutting:
  (4)WG1潺潺气气压及收费量:
  (4) WG1 swirl gas pressure and flow rate:
  (5)WG2潺潺气气压及收费量:
  (5) WG2 swirl gas pressure and flow rate:
  (6)板厚档位:共3个档位,根据参数表设定。
  (6) Plate Thickness Gear: There are 3 Gears, which are set according to the parameter table.
  数有:
  The parameters are:
  (1)引弧时间:即穿孔时间,穿过键盘直接输入;(2)切割速度:穿过键盘直接输入;(3)割缝补偿:穿过键盘直接输入;(4)引弧高度:即穿孔高度,在割枪部位手动调节;(5)弧压:在弧压传感器上手动调整,该值决定割枪的切割高度。在切割过程中调剂时,着眼等离子电源上弧压显示值直到与参数表上的值匹配为止。
  (1) arc initiation time: that is, the time of perforation is input directly through keyboard; (2) cutting speed: input directly through keyboard; (3) slot compensation: input directly through keyboard; (4) arc initiation height: that is, the height of perforation, which is manually adjusted at the cutting gun position; (5) arc pressure: manually adjusted on the arc pressure sensor, which determines the value. Cutting height of cutting gun. When adjusting during cutting, the display value of arc voltage on plasma power supply is observed until it matches the value on parameter table.
 

  美洲杯竞猜平台是大型美洲杯足彩竞猜厂家,数控美洲杯竞猜官网厂家,分立式美洲杯竞猜平台厂家www.neyon.net,供应河北美洲杯足彩竞猜,辽宁数控美洲杯竞猜官网,澳门便携式美洲杯竞猜平台,江西美洲杯足彩竞猜,广西数控美洲杯竞猜官网,江西美洲杯竞猜平台,陕西美洲杯竞猜平台,甘肃美洲杯竞猜平台,山东切割机,浙江切割机,安徽美洲杯竞猜平台,福建切割机,山西切割机,青海美洲杯竞猜平台,四川美洲杯竞猜平台,安徽切割机,海南美洲杯竞猜平台,云南美洲杯竞猜平台,吉林美洲杯竞猜平台,甘肃切割机,青海切割机,陕西美洲杯竞猜平台,蒙古美洲杯竞猜平台,要求的爱侣联系我们15254176866

  • 沟通电话

    18396804865
  • 微信扫一扫

  • 电话机咨询
    邮件咨询
    在线地图
    QQ客服
    血站地图
    <menu id="f11e8898"></menu>

        <b id="f4c6753f"></b>